Ma Nian Market Express | Algerian Government Promotes 22 Million Home CO Alarm Installation Plan

News2026-09-28
National installation continues to advance, and the sales of household gas appliances and product quality requirements are simultaneously clarified

Algeria is continuously promoting the popularization of residential carbon monoxide (CO) alarms. The three main lines of the market are the national requirements for free installation, sales of household gas appliances, and localized manufacturing. The award amount for large-scale procurement in 2023 has been disclosed; On June 7, 2026, SAIEG, a subsidiary of Algeria's national power and gas company Sonelgaz, released a new component tender, indicating that future opportunities are extending towards the local production supply chain.

Government procurement continues to advance

The goal of Algeria's national power and gas group Sonelgaz is to equip approximately 11 million households with 22 million CO alarms. The group disclosed in April 2026 that the cumulative installation volume had exceeded 17.6 million units and stated that local production was underway. Based on the target and installed quantity, there are approximately 4.4 million units remaining.

This project has made Algeria a noteworthy market for household CO alarm applications. In the next stage, the industry's focus will further extend to subsequent installation, equipment maintenance, end-of-life replacement, and quality assurance of the local supply chain.

Expansion of supporting sales requirements and clearer product compliance

On November 10, 2020, a cross departmental commission issued the "Technical Regulations for Safety Requirements of Household Carbon Monoxide Electrical Detection Equipment", which was published in the 38th issue of the "Official Gazette" in 2021. CO detection equipment suitable for continuous operation in residential areas, with Type A (sound and light alarm and external control output) and Type B (sound and light alarm) specified, and requirements for alarm, fault, battery, identification, etc. specified.

On June 23, 2025, a cross departmental order was issued and published in the 51st issue of the Official Gazette 2025 (August 5). Revise Article 5: CO alarm should be sold to consumers as a supporting device for household gas equipment; At the same time, it is required to supplement the end-of-life function, battery discharge data, and the manufacturer/importer providing laboratory issued compliance certificates to the competent inspection department.

Based on NA 16803, advance the validation of the entire machine

The Algerian standardization agency IANOR has included NA 16803:2020, titled 'Gas detectors - Electrical equipment for carbon monoxide detection in household settings - Part 1: Test methods and performance requirements', and the IANOR directory lists its corresponding EN 50291-1:2018. There is also NA 16806:2020, a guide for the selection, installation, use, and maintenance of CO detection equipment for residential, RV, and marine use, corresponding to EN 50292:2013.

Public bidding and procurement details from 2023 to present

From the Mediterranean coast to the Sahara: Environmental differences determine validation boundaries

Algeria, from north to south, covers humid coastal areas, cold winters and hot summers on plateaus, as well as the dry and sandy Sahara, with over 80% of its territory covered by the Sahara Desert. Official national climate data takes Algiers, Plateau Djelfa, and Sahara A ï n Salah as examples: the average temperature in January is about 11.3 ° C, 5.0 ° C, and 14.5 ° C, respectively; Algiers has an average temperature of about 25.3 ° C in July, and A ï n Salah has an average temperature of about 36.9 ° C in July.

The World Meteorological Organization recorded an outdoor maximum temperature of 51.3 ° C in Valgra on July 5, 2018.

Therefore, manufacturers of carbon monoxide detectors must pay special attention to the selection of key components such as CO sensors

✓ High temperature resistance performance

✓ Long term stability

✓ Low temperature start-up capability

✓ Ability to resist humidity effects

✓ Anti silicon poisoning ability

It should be noted that the water in the built-in water storage tank or the water generated by the electrode reaction in traditional water-based electrochemical carbon monoxide sensors may freeze at temperatures below 0 degrees, causing the sensor to fail at low temperatures; It may also significantly shorten the lifespan of the sensor due to prolonged exposure to high temperatures, which accelerates the rate of water evaporation in the water storage tank.

In addition, the water in the built-in water storage tank of the carbon monoxide sensor in the water system is constantly consumed. The amount of water in the water storage tank gradually decreases, and the amount of air gradually increases. When the temperature rises, the volume expansion coefficient of the liquid is much smaller than that of the gas. Therefore, due to the volume expansion, the pressure applied to the electrode also increases significantly, resulting in severe zero drift of the sensor at high temperatures.

The extreme climate in Algeria has a significant negative impact on the performance, accuracy, and lifespan of traditional water-based electrochemical carbon monoxide sensors.


FC-CO-5000 and FCW-CO-5000-0X: A unified sensing platform for multi scenario applications

ProSense provides an anhydrous carbon monoxide sensing solution that covers multiple application scenarios, bringing higher design flexibility to carbon monoxide detector manufacturers and significantly simplifying product compliance processes.

Relying on its independently developed gas sensing technology platform, ProSense has become the world's first CO sensor manufacturer to pass UL Solutions' 1024 hour anti silicon poisoning test and 85 ° C high temperature reliability certification.

The FC-CO-5000 and FCW-CO-5000-0X series carbon monoxide sensors from ProSense have a working temperature range covering -40 ° C to+85 ° C. They are currently the only CO sensor solutions in the industry that meet UL certification requirements for residential, RV, and yacht applications in both the European Union and North America.

In the design phase, the product is systematically planned around multi application scenario compliance and long-term reliable operation, fully considering the comprehensive requirements of temperature adaptability, stability, and consistency of sensors under different environmental conditions. This helps the whole machine manufacturer build a product portfolio covering multiple markets on a single sensing platform.

By adopting FC-CO-5000 and FCW-CO-5000-0X, complete machine manufacturers can reduce the design and certification complexity caused by differences in application scenarios while meeting the requirements of EN50291-1, EN50291-2, UL 2034 (5th edition), and CSA 6.19-17 standards.

This unified platform solution helps reduce design adjustments and duplicate certification work caused by differences in application scenarios, thereby improving development efficiency and optimizing the overall compliance path, making global compliance simpler and enabling alarm enterprise owners to operate worry free.

Market oriented value

Unified Platform: Covering Multiple Application Scenarios with One Core Sensor, Simplifying Product Portfolio

Compliance guarantee: supporting certification needs in mainstream residential, RV, and yacht markets in Europe and North America

Reliable operation: Adapt to complex environmental conditions and enhance the long-term stability of end products

Accelerating time to market: reducing the time and cost pressure of repeated testing and re certification

About ProSense

ProSense is a high-tech enterprise dedicated to the research and manufacturing of advanced gas sensors, committed to providing high-performance and high reliability sensing solutions for global customers. The company continues to invest in core technology research and development, overcome key pain points in the industry, and continuously lead the development direction of gas sensing technology. With innovative products and excellent quality, ProSense is gradually growing into an important promoter and leader in the global gas safety monitoring field.
ProSense adheres to the full stack self-developed technology route, and has established a kilogram level gas sensor catalyst research and development base and an automated production aging calibration system for millions of gas sensors per year. Its product line covers the fields of toxic and harmful, flammable and explosive, and environmental gas detection; ProSense's multiple innovative products have become core sensing components in vertical fields such as smart firefighting, industrial testing, and energy storage safety.
Contact Us
Contact Us
Online Service
Provide comprehensive customer service through real-time communication
Consult Now
Official Flagship Store
Build a first-class gas sensing solution provider
Wechat Official Account
Follow the official WeChat QR code of ProSense
View QR Code