IEC/EN 60079-29-2 Guide for Selection and Use of Gas Detectors: Application Limitations of Thermal Conductivity Hydrogen Detectors
News2026-10-14
With the increasing demand for low concentration early warning and multi-level safety linkage in energy storage systems, the evaluation of gas detectors needs to further focus on the measurement reliability in practical application environments.
For critical facilities that simultaneously affect personnel safety, asset protection, and business continuity, gas detection systems not only need to identify the presence of gas, but also undertake key responsibilities such as triggering graded alarms, coordinating accident ventilation, controlling equipment operation, and supporting emergency decision-making. If the detection results cannot accurately reflect the gas concentration on site, even if the sensor can respond to the gas, it is difficult to provide reliable basis for safety linkage and risk decision-making, and even more difficult to meet the requirements of critical industrial safety applications
International standards and foreign research reveal why thermal conductivity based hydrogen detection is limited by application conditions
In the European and international fields, IEC/EN 60079-29-1 and IEC/EN 60079-29-2 provide a mutually coordinated technical basis for combustible gas detection from both product performance and practical application perspectives.
According to the product performance requirements of IEC/EN 60079-29-1, its applicability still needs to be evaluated in conjunction with IEC/EN 60079-29-2 and actual usage conditions. IEC/EN 60079-29-2:2015 is a European/international dual numbering standard for the selection, installation, use, and maintenance of combustible gas and oxygen detectors used in explosive environments. Thermal conductivity sensors can respond to hydrogen gas, but their detection results are simultaneously affected by gas composition and environmental conditions. It provides systematic guidance and specifications for industrial safety management personnel and engineering technicians, and the standard clearly specifies and limits the application boundaries of thermal conductivity hydrogen detectors.
IEC/EN standard: Background gas changes and mixed gas response may weaken detection capability
Article 5.3.3 and Appendix A.3.3 of IEC/EN 60079-29-2:2015 specify the application limitations of thermal conductivity gas detection: within the specified detection range, the impact of expected background gas changes on the measurement results should be negligible relative to the target gas response.
Thermal conductivity sensors do not have single gas selectivity and can be affected by other combustible and non combustible gases. Unless the proportion of each component in the mixed gas is known and stable, its response cannot be determined. In the worst-case scenario, the effects of high and low thermal conductivity gases may cancel each other out, resulting in ineffective response of the equipment.
Appendix A.3.4 further points out that changes in water vapor content can introduce measurement interference, especially in high-sensitivity applications, which may require sample gas conditioning measures.
NIST in the United States: Specific devices have insufficient low concentration response, but condensation produces an equivalent reading of about 3000 ppm
The National Institute of Standards and Technology (NIST) evaluated various commercial hydrogen sensors in its 2007 Preliminary Performance Assessment of Commercially Available Hydrogen Sensors.
Among them, the thermal conductivity sensor A with a range of 0-100% volume fraction still did not show sufficient detection sensitivity under the condition of up to 7000 ppm hydrogen gas; But at 25 ° C, 100% relative humidity, and condensation occurs, a hydrogen equivalent reading of approximately 3000 ppm is produced.
This result indicates that specific thermal conductive devices may have both insufficient target gas response and significant environmental interference. NIST emphasizes the need for further testing at the target alarm concentration, taking into account dynamic environments and concentration changes. This study did not generalize the above results to all thermally conductive products.
Infineon and Fraunhofer researchers: Humidity interference exhibits temperature dependent nonlinearity
The article "On the Influence of Humidity on a Thermal Conductivity Sensor for the Detection of Hydrogen" published in Sensors in 2024 studied the humidity response of three types of thermal conductivity sensors.
Under the studied conditions, the maximum humidity impact of IFX and PGS1000 devices is equivalent to approximately 11000-12000 ppm hydrogen gas; The STC31 device has a maximum hydrogen equivalent value of approximately 20000 ppm. STC31 was originally a CO ₂ measuring device, and its thermal conductivity response was compared using hydrogen equivalent values.
Research has found that all three devices are affected by humidity, and their nonlinear response is more pronounced at higher temperatures. These values reflect the interference of specific devices under research conditions and cannot be directly used as error indicators for complete finished detectors. The complex environment inside the energy storage box amplifies the aforementioned application risks.
Sensirion Switzerland: Compensation relies on humidity sensors that are susceptible to VOC pollution
Sensirion technical data indicates that certain VOCs can diffuse into moisture sensitive polymers, alter their dielectric properties, and compete with water molecules for binding sites, causing a shift or slope change in humidity output; When heavily polluted, sensors may lose their normal response to humidity changes.
For designs that rely on humidity data to correct thermal conductivity signals, this means that the compensation benchmark itself also needs to be validated. The inaccurate humidity data may further be transmitted to the hydrogen calculation results, which is an engineering judgment based on the measurement architecture.
The gas environment inside the energy storage box is very complex and its composition continues to change. Sealing materials, paint, abnormal battery exhaust, material volatilization, changes in ventilation status, and local gas accumulation may all alter the gas composition near the detection point.
High temperature, high humidity, temperature and humidity cycling, and condensation should also be evaluated based on the project location, temperature control design, and actual exposure conditions. High temperature and high humidity may not necessarily occur simultaneously in all stages, but their changes and combined effects cannot be ignored.
By combining these conditions with standards and research results, two risk pathways that require key validation can be identified:
Direct interference path: Mixed gases and water vapor alter thermal conductivity response, causing concentration deviation, false alarms, or response cancellation.
Compensation error path: The humidity sensor used for compensation is affected by aging or pollution, resulting in inaccurate data entering the calculation and causing continuous deviation of hydrogen output.
Why are thermal conductivity sensors not suitable for BESS hydrogen detection?
Thermal conductivity sensors usually use air or specific background gases as calibration basis, and calculate hydrogen concentration by comparing the thermal conductivity difference between the mixed gas and the reference environment.
However, background gases in real business environments are often unstable. For thermal conductivity sensors lacking gas selectivity, similar output signals may correspond to different gas compositions; The same actual hydrogen concentration may also produce different measurement results due to changes in background gas.
1. BESS focuses more on "extremely early warning capability"
In lithium battery energy storage systems, the goal of gas detection is not only to detect the presence of gas, but more importantly, to achieve extremely early warning before thermal runaway escalates into a fire. When a battery experiences an abnormality, it may initially release only a very low concentration of:
hydrogen
carbon monoxide
VOC gas
Electrolyte volatiles
Modern energy storage safety systems require:
Low concentration ppm level detection capability
Early combustible gas identification capability
Risk prediction ability
Thermal conductivity sensors are usually more suitable for detecting high concentration gases and are not good at early identification in ultra-low concentration scenarios.
2. The gas composition in energy storage systems is highly complex
During the process of battery thermal runaway, the released gas will dynamically change and may simultaneously contain:
hydrogen
carbon monoxide
Methane
Hydrocarbon gas
HF
VOC
Smoke particles
Thermal conductivity sensors cannot accurately distinguish the influence of different gases on thermal conductivity. Therefore, in energy storage scenarios, it is easy to face:
Lack of selectivity
Risk of false alarm
Concentration judgment deviation
For safety critical systems, such limitations carry high risks.
3. BESS has higher requirements for functional safety and long-term reliability
Energy storage systems are critical infrastructure. Once the gas detection system fails, it may lead to fire escalation, explosion risk, asset loss, impact on power grid stability, and personnel safety risks.
Therefore, the industry is paying increasing attention to energy storage gas detection systems:
long-term stability
Environmental adaptability
Anti drift ability
System redundancy design
Multi sensor verification mechanism
In contrast, thermal conductivity sensors are more susceptible to environmental changes, airflow variations, temperature fluctuations, and other factors.
Energy storage system and AI data center: Gas detection simultaneously relates to safety and business continuity
With the rapid development of generative AI and high-performance computing, the cabinet power density, overall power load, and backup power capacity of AI data centers continue to increase.
Large capacity UPS, lithium-ion battery energy storage cabinets, and modular energy storage systems are becoming important infrastructure to ensure the continuous operation of data centers. At the same time, the risk of thermal runaway and accumulation of flammable gases caused by the battery system also increases.
For data centers, energy storage systems, petrochemical and hydrogen facilities, combustible gas detection systems not only provide alarm functions, but also need to provide reliable decision-making basis for automatic control systems.
The gas detection system of the energy storage system and AI data center may participate in the following safety functions:
Activate accident ventilation
Stop battery charging and discharging
Isolation of faulty battery clusters
Send an alarm to the data center infrastructure management system
Initiate personnel evacuation and emergency response
Provide risk information for operation and firefighting personnel before entering the equipment room
This means that AI data centers not only need to prevent false positives, but also need to control false positives.
Missing reports may lead to:
Missing early signals of battery abnormalities
Ventilation and equipment isolation delay
Combustible gases continue to accumulate
Operations or firefighting personnel enter without understanding the risks
The risk of fire, explosion, and equipment damage has increased
False positives may lead to:
Unplanned exit of UPS or battery system
Redundancy reduction of backup power supply
Accident ventilation system misoperation
The operation and maintenance team frequently intervenes
The data center management system generates a large number of invalid alarms
Alarm fatigue occurred on site
Therefore, the requirements for hydrogen sensors in AI data centers should not be limited to "being able to alarm", but should also verify their low concentration sensitivity, selectivity, environmental adaptability, long-term stability, and fault diagnosis capabilities.
Shift from "product selection" to "safety function verification"
NIST research shows that evaluating a hydrogen sensor should not only focus on its range and accuracy under standard experimental conditions, but more importantly, confirm whether it can continuously perform the assigned safety functions throughout the entire lifecycle of the target application.
During the selection and acceptance process of gas sensors, the energy storage system and AI data center need to focus on verifying the following items:
1. Low concentration detection capability
Conduct tests at actual alarm thresholds and concentrations below them to confirm that the sensor can provide stable, reproducible, and sufficiently signal-to-noise ratio output.
2. Temperature, humidity, and condensation effects
Test the zero point, sensitivity, recovery time, and false alarm performance under temperature cycling, high humidity, rapid humidity changes, and condensation conditions.
3. Adaptability to mixed gases
Introduce CO, CO ₂, hydrocarbons, water vapor, refrigerants or electrolyte volatiles based on practical applications, evaluate cross effects and quantitative errors.
4. Dynamic response capability
Confirm the actual response time of sensors and complete detectors using different leakage rates, airflow velocities, and concentration rise rates.
5. Long term stability and fault identification
Evaluate the status of aging, drift, pollution, disconnection, and output freezing to ensure that the system can identify sensor faults, rather than assuming zero output as safe.
ProSense is a gas sensing solution specifically designed for energy storage systems and AI data center lithium battery scenarios
As an industry leader in the research and manufacturing of advanced gas sensors, ProSense continues to promote technological breakthroughs and international compliance processes in the field of energy storage applications, starting from complex on-site environments.
The company's series of carbon monoxide and hydrogen sensors have become the world's first products to achieve UL silicon poisoning resistance and 85 ° C high temperature reliability certification. The working temperature range of the product covers -40 ℃ to 105 ℃, making it a benchmark in the industry for environmental adaptability, long-term stability, resistance to silicon poisoning, and reliability. It has been widely used in energy storage system safety monitoring, AIDC infrastructure, and new energy related scenarios.
Advanced gas sensing solutions include:
Low concentration and multi-level hydrogen detection and system linkage: achieve integration of low concentration (500ppm), 10% LFL (4000ppm), 25% LFL (10000ppm) multi-level concentration hydrogen detection with battery management system (BMS) and safety control strategy.
Anti pollution and anti silicon poisoning design: effectively reduces the chemical coverage of sensitive components by interfering substances such as VOCs and siloxanes, and improves the stability of hydrogen and CO sensors in long-term high pollution environments.
Optimization of high temperature resistance: Meet the continuous testing requirements of energy storage facilities under closed energy storage cabinets and high temperature operating conditions before operation.
Improved lifecycle stability: Extend the effective operating cycle of sensors, reduce the risk of frequent on-site replacement, maintenance, and drift.
AboutProSense
ProSense is a high-tech enterprise dedicated to the research and manufacturing of advanced gas sensors, committed to providing high-performance and high reliability sensing solutions for global customers. The company continues to invest in core technology research and development, overcome key pain points in the industry, and continuously lead the development direction of gas sensing technology. With innovative products and excellent quality, ProSense is gradually growing into an important promoter and leader in the global gas safety monitoring field.
ProSense adheres to the full stack self-developed technology route, and has established a kilogram level gas sensor catalyst research and development base and an automated production aging calibration system for millions of gas sensors per year. Its product line covers the fields of toxic and harmful, flammable and explosive, and environmental gas detection; ProSense's multiple innovative products have become core sensing components in vertical fields such as smart firefighting, industrial testing, and energy storage safety.